Hallo zusammen,
ich möchte mir das Blitzortungssystem als Bausatz anschaffen und weiß nun nicht genau welches was ist.
Habe gelesene dass das TOA empfohlen wird. Wenn ich in den FAQs von Blitzortung nachsehe, wird etwas von Hardware, Software und System RED gesprochen. Ist System RED die Hardware oder was ist der Unterschied zur "Hardware"?
Vielleicht kann mir der eine oder andere etwas auf die Sprünge helfen.
Elektronische Kenntnisse und Löten sind kein Problem für mich. Ich versuche nur etwas besser den Einstieg zu finden. Laut der Email die Ich von Blitzortung bekommen habe, habe ich ein paar Vorschläge zu den Komponenten bekommen.
Was würdet ihr mir empfehlen? Ist das as System RED?
Hier der Auszug der Email:
################################################################################
25. May 2014
Dear potential TOA Lightning detection participants,
welcome to Blitzortung.org. This is an automatically send
email.
If you are interested in seting up an own detector, then
please first read carefully the documentations and visit at least one of the
forums linked at the page "Cover your Area". A documentation of
System RED can be found here
SETTING UP A TOA LIGHTNING DETECTOR IST NOT
PLUG-AND-PLAY!!!
You definitely need some experiences in soldering of
elektronic components. The kits contain, among other things, several SMD ICs
with an SOIC8 housing.
********************************************************************************
You can get from us either a basic set that only contains
the parts that are difficult to get on most countries or a complete set. We do
not offer already assembled systems but only kits.
The prices of the basic sets are
a.) Controller board PCB 10.4, GlobalTop PA6H GPS module,
SMA connector, and a network connector for = 31.50 Euro.
b.) H-Field Amplifier board PCB 12.3c, 4xMCP6S91,
2xMCP6292, 2xLMH664, and a programmed ATmega8 microcontroller for = 18.50 Euro.
c.) E-Field Amplifier board PCB 13.1b, 4xMCP6S91,
1xMCP6292, 3xLMH664, 1xTLE2426a, and a programmed ATmega8 microcontroller for =
21.00 Euro.
d.) E-Field Pre-Amplifier board and an ADA4891 for
together = 4.00 Euro.
The prices of the complete sets are
A.) Controller 10.4 kit = 74.00 Euro
B.) H-Field Amplifier 12.3c kit = 31.95 Euro
C.) E-Field Amplifier 13.1b kit = 37.50 Euro
D.) E-Field Pre-Amplifier 14.1b kit = 7.65 Euro
E.) two 20cm ferrite rod antennas = 45 Euro (you also can
build your own loop antennas)
F.) STM32F4DISCOVERY board = 20 Euro
(you also can get this board from http://www.mouser.com world wide)
G.) external GPS antenna (SMA 5m) = 20 Euro
H.) amber display insted of a green display which is
contained in set A = 10 Euro
Additionally you need a 5 Volt USB power supply with mini
USB plug and some CAT network cable. The network cable is necessary to
connect the amplifier with the controller and to connect the
controller with your local area network.
The price for shipping varies between 7 and 40 Euro
depending on the weight of the order and the country you live.
From european Euro countries, I prefer money transfer to
Egon Wanke,
Fabriciusstrasse 10
D-40225 Duesseldorf
Germany
Account No. 0545474303
Postbank Hannover: 25010030
IBAN DE57 2501 0030 0545 4743 03
BIC PBNKDEFF250
You can also by PayPal to blitzortung@gmx.org . Then the price of XEuro
will increase by a factor of 1.02 for Euro Countries and by a factor of
1.04 for all other countries.
********************************************************************************
Most people from germany order a+b+E and pay by money
transfer, then the price is (31.50+18.50+45+7) = 102.00 Euro (7 Euro for shipping)
Most people from European countries order A+B+E+F+G and
pay by PayPal, then the price is (74+31.95+45+20+20+17)*1.02 = 212.11 Euro (17 Euro for
shipping) Most people from USA order A+B and pay by PayPal, then
the price is (74+31.95+10)*1.04 = 120.59 Euro (10 Euro for shipping
because of the low weight).
See also
If you are still interested, please send us your postal
address and the information about the parts you want.
Do not pay before you get a reply about the price for
shipping and the information that we have all the material on stock.
Regards and much fun,
Egon Wanke
DL1YDB
################################################################################
Please note: Blitzortung.org is a community of volunteers
with noncommercial interests. We make no contracts. A
commercial use of our data is prohibited. Since most of the users have no
possibility to get the material in some countries, we spend our free time to
buy the necessary parts here in Germany, pack them into a parcel,
and ship it to you. We do all this just as a favor, there is no extra
charge. Since we are no salesmen, we send no invoices for the material and
service (only on occasional exception, if the users will recover the
appropriate amount via official channels). We can not include the
invoices we get from our local vendors, because these invoices are for
the parts for several kits.
########################################################################
Was ich bisher gefunden habe ist noch das hier:
und eine deutsche Anleitung zu System RED.
Sind in diesen Sets die Bauteile integriert oder wie schaut das aus.
Ich würde gerne wissen welche Komponenten ich wo bestellen muss.
Viele Grüße und vielen Dank für eure Auskünfte.
Timo